The continuous bright annealing furnace for small stainless steel parts is suitable for batch heat treatment of small and medium-sized mechanical parts (such as standard parts, bearings, transmission chains, stainless steel screws, stainless steel rivets, textile hardware, springs, spring pads, various textile needles and sewing needles) in controlled atmosphere.

Advantages of continuous bright annealing furnace for small stainless steel parts:

1. The arrangement of heating elements is reasonable and the temperature in the furnace is uniform;

2. The heating furnace is of split structure, which is convenient for maintenance;

3. The mesh belt runs smoothly, the mechanical transmission mechanism is safe and reliable, the mesh belt does not "run away", no "stuck" phenomenon, and the failure rate is reduced.

4. Muffle sealing is good, saving the consumption of controllable atmosphere.

5. After heat treatment, the surface of the product is smooth, the hardness is uniform, and the deformation is small.

6. The heating products are heated in muffle tube, which can get high quality products with low cost;

7. Because the product is protected by nitrogen hydrogen mixture or nitrogen, the traditional pickling process is cancelled, which not only improves the product quality, but also overcomes the environmental pollution caused by pickling.